3. Operation of CON Related Controllers
170
3.26.2.3 Press Program Copy
Copy of a saved pressing program can be made.
Check the program number to make a copy from and the
domain number to make a copy to in the pressing program
select window.
Touch [Copy] button.
The press program copy screen appears.
Input the number to copy from and the number to copy to.
Touch [Copy] button.
(Note) Copy button cannot be touched unless both of the
number to copy from and the number to copy to are
input.
A confirmation window for overwriting will show up if a
pressing program is saved in the number to make a copy to.
Touch Yes button when overwriting.
Touch No button to cancel overwriting.
(The screen will go back to the pressing program copy window
in this case.)
Copy Complete window will be displayed once the copy is
complete.
Touch [OK] button.
Return to the press program edit scrren.
To Next Page
Loading...