4. Operation of SEP Related Controllers
199
4.9 Alarm List
A list of alarms that may generate after the controller power is turned on is shown. [For alarm
details, refer to 8. “Error Display.”]
Touch [Alarm List] on the SEP menu screen.
The controller's alarm list appears.
Controller without the calendar function
Touching [] displays the list of the next screen.
Touching [] displays the list of the previous screen.
Touching [Clear] clears all alarm details.
(Note) PowerUP No Error indicates that the controller power was turned on.
It does not indicate an error.
The time of occurrence of each alarm is indicated by an elapsed time from this
PowerUP No Error.
To Next Page
Loading...