6. Operation of ELECYLINDER
354
Touch [Yes].
Touch [No], and the controller will not be rebooted and the
screen returns to the previous.
6.13.2 Axis Number Change
Touch [Change axis No.] in Other setting window to display Axis No. setting screen.
You can set a value between 0 and 15.
Set a desired axis number and then touch [ENT].
Touch [Execute].
The controller is restarted.
Returns to Menu 1 screen.
Caution: If the controller is not restarted, the parameters that have been rewritten to their
factory settings do not translate to the factory-set operations.
The factory settings will become effective once the controller is restarted or power
is reconnected.
To Next Page
Loading...