6. Operation of ELECYLINDER
324
● Display change from English to Chinese
(1) Touch [Menu2] in Menu1. (2) Touch [Env. Set.] in Menu2.
(3)
Touch [Chinese]. (4) Touch [写入上述设定].
(
Note
)
Skipping to another window without touching [
写入上述设定
] will allow setting to go back
to that before changed.
● Display change from Chinese to English
(1) Touch [菜単 2] in 菜単 1. (2) Touch [环境设定] in 菜単 2.
(3)
Touch [英语]. (4) Touch [Write the above setting].
(
Note
)
Skipping to another window without touching [Write the above setting] will allow setting
to go back to that before changed.
To Next Page
Loading...