4. Operation of SEP Related Controllers
218
No. Operation Screen Remarks
7 Touch [Chg Dis] and set a
desired inching distance.
8
Use [Inching-] and [Inching+]
to move the slider or rod to
the target position of 30.0
mm.
9 Touch [Teach].
10 Touch [Yes].
11 Touch [Menu].
12 30.00 is shown in Position.
It is now confirmed that the
position data has been
acquired.
Touch [Menu] to return to the
position setting screen.
13 Touch [Menu].
Touch [Menu] to return to the
position setting screen.
To Next Page
Loading...
