4. Operation of SEP Related Controllers
226
The screen corresponding to the selected operation pattern appears.
Operation pattern 0 (standard movement between 2 points), operation pattern 1 (change travel
speed), operation pattern 2 (change position data)
Operation pattern 3 (movement by 2 inputs among 3 points), operation pattern 4 (movement
by 3 inputs among 3 points)
Operation pattern 5 (continuous back-and-forth operation)
The items that can be set vary with each operation mode.
Touch [Back] to return to the operation pattern screen.
Next
Next
Next
To Next Page
Loading...