4. Operation of SEP Related Controllers
244
When the numeric keypad appears, enter a desired value
and then touch [ENT].
You can set a value between 0 and 15.
Touch [Execute].
In this example, 15 is set.
[Init Parameter]
The parameters are reset to their factory default settings.
Touch [Yes].
Touch [No] to return to the parameter menu screen
without resetting the parameters to their factory default
settings.
Touch [Yes].
The controller is restarted.
The controller operates according to the factory-set
parameters.
The display returns to the initial setting screen.
Touch [No], and the controller will not operate according
to the factory-set parameters until restarted.
To Next Page
Loading...