6. Operation of ELECYLINDER
367
[Startup screen setting]
Setting can be established for the window shown in the screen first after the power is turned on.
Also, show/hide can be selected for the icons of Position edit guide, I/O control guide and Easy
setting in Menu 1 screen.
Touch [Startup screen setting].
1) Guide Icon Display Select
This button is not to be used for ELECYLINDER.
2) Initial Screen Select at Startup
Select a screen from those below for the screen shown first
after the power is turned on.
[Monitor screen]
[Position edit screen]
[Parameter edit screen]
[Test run screen]
[Information screen]
Touch either one to select and touch [OK].
To Next Page
Loading...