9. Appendix
401
[Step 5]
Touch [Start update] button.
[Step 6]
The updating confirmation window shows up.
Touch [Yes] button.
[Step 7]
Start updating.
Touch the screen after you confirm the following messages;
“Program Update is All Done!!!”
“Touch the screen and this will be rebooted automatically.”
TB-02 will start up in the new version.
Caution: Do not attempt to turn off the power to TB-02 while in updating.
It is also available to perform by touching [SD Memory Card] → [Teaching update] in Menu 1
window.
[Step 1] Perform from 1 to 4 in “9.2.1 Preparation”.
[Step 2] Touch [SD memory card] button in Menu 1 window.
[Step 3] Touch [Teaching update] button.
[Step 4] Perform “Step 5” and after shown above.
To Next Page
Loading...