3. Operation of CON Related Controllers
81
(1) Basic operation
Touch [] to return to the previous screen.
Touch [] to move to the next screen.
Touch [No. sel.] and enter a desired parameter number, and the screen showing the parameter
you want to set will appear.
In this example, soft limit+ side is set.
Touch Soft limit+ side, and the numeric keypad will appear.
Enter a value and then touch [ENT] on the numeric
keypad.
To cancel the change after the numeric keys are displayed,
touch [ESC].
Touching the Home button opens a confirmation screen with a message asking if you want
to restart the controller.
Touch [Yes].
Touch [No] to return to the parameter screen without
restarting the controller or reflecting the parameter you
have set. To reflect the parameter you have set, you must
restart the controller.
Caution: If the controller is not restarted, the parameter that has been rewritten does not translate
to the intended action.
The parameter will become effective once the controller is restarted or power is
reconnected.
The controller is restarted, after which the parameter you have set will be reflected.
To Next Page
Loading...