The following switching points result:
No.: Day Time Function
01 Mon-Fri 06:30AM on
02 Mon-Fri 12:00PM off
03 Mon-Fri 01:00PM on
04 Mon-Thu 05:00PM off
05 Fri 03:00PM off
Tab. 61 Example of a machine ON/OFF clock program
Precondition Password access level 2 is activated.
1. Open the 6
Compressor clock
menu.
2. Use «Up» or «Down» to select the
01
line.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
6 Compressor clock
Menu
·········
01 n.a. 00:00AM off
Active line with switching point 01
02 n.a. 00:00AM off
Switching point 02
03 n.a. 00:00AM off
Switching point 03
04 n.a. 00:00AM off
Switching point 04
05 n.a. 00:00AM off
Switching point 05
3. Press «Enter».
The
n.a.
column flashes in the active line.
4. Use «Up» or «Down» to specify the settings for the weekdays.
5. Press «Enter» to accept the setting.
The setting is applied.
6. Press the «Right» key.
7. Press «Enter».
The display for hours,
00:00
flashes in the active line.
8. Use «Up» or «Down» to specify the settings for the hours.
9. Press the «Right»key.
10. The display for minutes, 00:
00
flashes.
11. Use «Up» or «Down» to specify the settings for the minutes.
8 Initial Start-up
8.5 Configuring machine start and stop
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
93
To Next Page
Loading...
