3. Press the «Up» key.
The check box is activated.
4. Press the «Enter» key.
The test mode is activated.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
9.1 Inspections
Menu
Safety valve : ☑
Active line with check box
pRV: 232psi ¦ pi ⇞ 36.0psi
Safety relief valve actuating pressure, internal pres‐
sure
Reset : ☐
·········
ADT ⇞ : ☐
Offset 32°F ¦ ADT ⇞ 32.0°F
5.
Risk of hearing damage when safety relief valve blows off!
➤ Close all maintenance doors, attach and secure all removable panels.
➤ Always wear ear protection.
6.
Risk of burns due to released cooling oil and compressed air when safety relief
valve blows off!
➤ Close all maintenance doors, attach and secure all removable panels.
➤ Wear eye protection.
7. Perform the test as follows according to machine type.
9 Operation
9.13 Safety relief valve test
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
191
To Next Page
Loading...
