KAESER SIGMA CONTROL 2 - Pressure control; Control mode; Compressor start; Acknowledgement

Navigation Function / Submenu
5.2 Pressure control ■ Pressure sensors
■ Pressure settings
■ Load control
■ Network actual pressure
For details of the Pressure control menu, please
see table 35.
5.3 Control mode
12)
Local mode:
■
Venting period
4)
■ DUAL
■
QUADRO
4)
■
Partial load valves
4)
5.4 Compressor start ■ Compressor on
■ Compressor off
Autostart:
Start inhibit:
Start temperature
5.5 Acknowledgement Remote mode:
RC Ack
Key remote
5.6 ETM
4) 12)
Heat recovery
Local mode:
Remote mode:
current
RC DI
Key remote
Heat recovery
ADT controller
Thermostat valve
Oil cooler
Thermostat valve
ADT controller
■ Oil cooler
■ Heat recovery
1)
Power switching with frequency converter
3)
SIGMA CONTROL 2 (Prepared for connection to control center)
4)
SIGMA CONTROL 2 FLUID
12)
not for AIRTOWER
13)
Power switching aircooler fan with frequency converter
5 Design and Function
5.6 Menu overview
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
35