KAESER SIGMA CONTROL 2 - I;O periphery; Timer; Refrigeration dryer (if available); PD temperature controller

Navigation Function / Submenu
5.7 I/O periphery ■ DO functions
■ Analogue values
■ External messages
■ Switch
For details of the I/O periphery menu, please
see table 36.
5.8 Timer on
off
DOR
current
5.9 Refrigeration dryer (if available) Control mode
Compressor ready:
Compressor Clk/RC/RB off:
Temperature ↑
DOR
DOT
Temperature ⇟
DOR
DOT
Safe compressed air supply/Safe compressed
air quality
Error operation without RD
active:
Run time max.:
Reset Alarm:
5.10 PD temperature controller
Nominal value
13)
Actual value
13)
Controller parameter
13)
KP/KI/KD
Actual values
13)
P/I/D/Y
1)
Power switching with frequency converter
3)
SIGMA CONTROL 2 (Prepared for connection to control center)
4)
SIGMA CONTROL 2 FLUID
12)
not for AIRTOWER
13)
Power switching aircooler fan with frequency converter
5 Design and Function
5.6 Menu overview
36
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2 No.: 9_9450 13 USE