113
Keysight Handheld Analyzers
N99xxC User’s Guide
7 Time Domain – Option 010
With NA Mode, Time Domain (Opt 010), frequency information is used to
calculate and display measurements with time as the horizontal display axis.
The response values appear separated in time allowing a different perspective
of the test device's performance and limitations.
NA Mode settings that are NOT unique to Time Domain are documented in
Chapter 6, “NA (Network Analyzer) Mode”, on page 89.
In This Chapter
Time Domain (Transform) Settings
Trace Settings
“Overview” on page 115
“Transform Settings Table” on page 116
“Start/Stop (Frequency Range) and Points” on page 116
“Stimulus (Mode)” on page 117
“Set Frequency Lowpass” on page 117
“Start/Stop Time” on page 117
“Distance Units” on page 118
“Window Layout” on page 118
“Transform Window” on page 118
“Line Loss and Velocity Factor” on page 119
“Data Chain” on page 120
“Gating Type” on page 123
“Transform Enable” on page 121
“Gate Enable” on page 121
To Next Page
Loading...
