Keysight Technologies C Series - 6 NA (Network Analyzer) Mode

89
Keysight Handheld Analyzers
N99xxC User’s Guide
6 NA (Network Analyzer) Mode
Learn more about NA Mode measurements in the FieldFox Supplemental
Online Help:
https://rfmw.em.keysight.com/wireless/helpfiles/FieldFoxOnlineSupplement
alHelp/Home.htm
.
In this Chapter
“About S-parameters” on page 91
“Mixed-Mode S-Parameters” on page 92
“Parameter Conversion” on page 93
“Receiver Measurements” on page 94
“Multi-Trace Configurations” on page 95
“Quick Settings” on page 96
“Calibration Settings” on page 97
“Format” on page 98
“Frequency Range” on page 99
“Scale Settings” on page 99
“Magnitude Offset” on page 100
“Electrical Delay” on page 101
“Phase Offset” on page 101
“Averaging” on page 102
“IF Bandwidth” on page 103
“Smoothing” on page 103
“Single or Continuous Measure” on page 103
“Resolution (Number of Data Points)” on page 104
“Sweep Time” on page 104
“Triggering (NA)” on page 105