Keysight Technologies C Series - LAN Settings

Keysight N9915-90020 User’s Guide 807
System SettingsFUTURE
System Configuration
How to MANUALLY set Date and Time, Format, and Time Zone
1. Press System 7 > System Configuration > More > Date and Time.
2. Press the arrows to highlight the row to be edited.
3. Then press
Edit.
4. Use the arrows or rotary knob to select and to edit a field.
5. Press Cancel or Done when the edits are complete.
6. Press
Done to exit the Date and Time settings. The readout in the
upper-right corner of the FieldFox screen will update accordingly.
LAN Settings
Configure the LAN settings to be used to communicate with the Data Link
Software and connect to the FieldFox for remote SCPI operation. Learn more
about Data Link at: www.keysight.com/find/fieldfoxsupport.
Because of licensing security, the manual and GPS Sync methods to set
Date and Time are restricted as follows:
– Can be set backward no more than 5 hours at a time.
– Can be set forward any amount of time.
– Can be set backward or forward no more than once in a day. A new day
begins at midnight.
– There is no restriction for setting the Time Zone.
– To change the Date and Time backward a significant amount, send an
email to
csg.servicedesk@keysight.com.
BEFORE manually setting the Date and Time, be absolutely certain that the
Time Zone setting is correct.