Keysight Technologies C Series - Playback Configuration; Manage Sessions

Keysight N9915-90020 User’s Guide 553
Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
Playback Configuration
By default, trace sweeps are played back as fast as the trace can be drawn on
the screen. The following setting allows you to slow playback. In addition, you
can manually scroll through individual traces using Playback Trace, or scroll
through State and User Tags using Playback State/Tag. Learn more in How to
Playback a Session in
“How to Playback a Session” on page 546.
To slow the playback of a session:
1. Record a new session or Open an existing session.
2. Press
Playback Configuration
3. Press Playback Interval
— Enter a value in seconds between 0 (no delay) and 100 using the
numeric keypad, arrows, or the rotary knob. After using the
keypad, select a multiplier key. Learn about multiplier
abbreviations.
— Press
Enter
4. Press First Trace to define the first trace in a Range of traces to be
recorded/played/saved.
Manage Sessions
1. Press Trace 6
2. Press Record Playback The following selections are available ONLY when a
session is NOT open.
3. Press Storage Device to select the media which stores the sessions to be
managed. This is a different setting from the Save/Recall Storage Device
setting.
4. Choose from the following:
—
Internal FieldFox memory (default)
—
SD Card An external SD Card (must be inserted)
—
USB An external USB flash drive (must be inserted)
5. Press
Manage Sessions
6. Choose from the following:
— Rename Using the FieldFox labeler, change the name of the session.
AutoSession (n) is the default name where (n) is the next-available
number. Learn more in “How to use the FieldFox labeler ” on
page 820.
—
Sort Arrange the listing of sessions by Name, by Date, or by Size.