Keysight N9915-90020 User’s Guide 459
5G Rapid Prototype Phased Array Antenna – Option 360
Using Mapping
This softkey is only available in Channel Scanner and Phased Array Antenna
modes (i.e., The Cursor Position softkey is not available for OTA mode).
— Red Limit to edit the red limit dBm value.
—
Blue Limit to edit the blue limit dBm value.
Using Mapping
The Phased Array Antenna mode has indoor and outdoor mapping capability.
Refer to
Chapter 16, “Indoor and Outdoor Mapping – Option 352 (Requires
Spectrum Analyzer Mode (Option 233), and GPS Receiver (Option 307)).”
Other Features Available
— Alignments - For information on using alignments, refer to the SA chapter’s
section,
“Alignments” on page 206.
— External Gain - Refer to refer to the SA chapter’s section,
“External Gain”
on page 160.
— Field Strength Corrections – “How to select and edit corrections for Field
Strength measurements” on page 163
— Scale Settings – For information on using scale settings, refer to the Data
Analysis chapter’s section,
“All about Scale Settings” on page 762 (not all
of the settings apply to OTA Option 360).
To Next Page
Loading...
