818 Keysight N9915-90020 User’s Guide
File ManagementFUTURE
Saving and Recalling Files
Saving and Recalling Files
The FieldFox model families are:
— N991x (VNA/SA) model family
— N992x (VNA) model family
— N993x (SA) model family
— N995x (VNA/SA) model family
— N996x (SA) model family
Save Files
How to Save a File
1. Press Save/Recall 9
2. Then Save
3. At the top of the current ‘labeler’ screen (see following image) check the
File Type to save and Device (Internal, USB, Storage Card) to which the file
is saved. Learn how to change these settings in “Set File Type and Select
Device” on page 823
.
4. Then use the labeler to specify a filename.
FieldFox State files are intended to be recalled on the same instrument
model on which they were saved. Sometimes you may able to recall them
within model families. An error will result when trying to recall a state file
that was saved on a different model family.
To Next Page
Loading...
