EasyManua.ls Logo

Keysight Technologies C Series - Troubleshooting; GPS lock Errors

Keysight Technologies C Series
914 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
528 Keysight N9915-90020 User’s Guide
Direction Finding (Option 390 Time Difference of Arrival (TDoA)) – Requires Spectrum
Analyzer Mode (Option 233), and GPS Receiver (Option 307)
Troubleshooting
Troubleshooting
GPS lock Errors
GNSS receiver must be locked for a successful test, but it may take some
time to achieve lock condition. Allow enough time for the GNSS receivers to
achieve lock after activating them on all FieldFox units.
The following error message is displayed when the GNSS receiver is
unlocked.
Figure 17-1 GPS Error Messages
Possible solutions:
Running the test again after this error is usually successful because
the GNSS receiver would have enough time to lock.
Alternatively, check the GPS state directly on each FieldFox unit
before proceeding with the test.

Table of Contents

Related product manuals