Keysight Technologies C Series - Using the Antenna;Cable Editor; Using Mapping; Using Resolution Bandwidth Tradeoff (Res BW Tradeoff)

670 Keysight N9915-90020 User’s Guide
Channel Scanner (Option 312)
How to Set Up Channel Scanner
Using the Antenna/Cable Editor
To learn more, refer to Chapter 9, “SA (Spectrum Analyzer) Mode (Option
233–Mixed Analyzers)FUTURE.”
and to “Using the Antenna/Cable Editor” on
page 165
.
Using Mapping
Channel Scanner mode has indoor and outdoor mapping capability. Refer to
Chapter 16, “Indoor and Outdoor Mapping – Option 352 (Requires Spectrum
Analyzer Mode (Option 233), and GPS Receiver (Option 307)).”
Using Resolution Bandwidth Tradeoff (Res BW Tradeoff)
This feature controls the resolution bandwidth for the current measurement.
To use this feature, press BW 2
> Res BW Tradeoff then choose from the
following:
—
High Sensitivity – Use this setting for greatest accuracy (Res BW = 1500).
—
Medium – This is the default setting (Res BW = 450).
—
Speed – When you want the fastest possible measurement (Res BW = 150).