Keysight N9915-90020 User’s Guide 829
File ManagementFUTURE
Saving and Recalling Files
Manage Folders
You can create new folders, delete old folders, and select the active folder to
which files can be saved. The Parent folder [..] is listed when not in the root
directory.
Creating and Managing Folders
1. Press Save/Recall 9
> More > Manage Folders
2. Then choose from the following:
— Change Folder Changes the active folder to which files can be
saved. The active device and current folder is displayed at the top of
the screen, and below, a list of files in that folder. Use the
arrows to highlight a folder within the current folder. Each time the
Change Folder softkey is pressed, the highlighted folder becomes
the active folder.
—
Create Folder
A new folder is created in the current folder. Select a
name for the new folder from one of the displayed keywords: You
can change these keywords using the following Edit Keywords
function. Refer to Edit Keywords in “Edit Keywords” on page 828.
—
Delete Folder The selected folder and its contents are deleted after
a warning prompt is displayed. A “Parent” folder or system folder
can NOT be deleted.
—
Copy Folder The selected folder and its contents are copied and a
message is displayed telling you that the copy was successful.
— Then select a device to copy the folder to. Choose from
Copy to Internal, Copy to USB (must be inserted), or Copy
to SD Card (must be inserted).
—
Do Copy to complete the file copy to the media/folder
selected.
— Rename The rename folder menu opens and the selected folder’s
title is displayed and available for editing.
— Press Exit when finished.
Edit Keywords
The preselected keywords (FILE, SITE, and so forth) can be edited to meet your
specific needs. Your keywords will remain in the FieldFox until you change
them. Keywords are limited to 30 characters.
For more on renaming folders/files, refer to “How to use the FieldFox
labeler ” on page 820, and “Prefixes and Suffixes for Filenames” on
page 829
.
To Next Page
Loading...
