Keysight Technologies C Series - File folders; Alpha Numeric Editing; File Saving Naming Options; Quick Save Editing

Keysight N9915-90020 User’s Guide 789
System SettingsFUTURE
Preferences
automatically when Frequency Reference Source is set to
GPS. Learn more in
“Frequency Reference Source” on
page 800.
File folders
When enabled, FieldFox uses the last selected Device and Folder location as the
default device location after instrument power cycle.
How to set File Folders
1. Press System 7
> Preferences > Preferences
2. Then scroll to User Folder Persist:
— User Folder Persist (On/Off) – Defaults to the current Device and
folder location at power up. Toggle User Folder Persist On/Off when
a new Device location is selected location.
—User Folder – displays the default folder location.
—User Device – displays the default device location.
See also:
“Alpha Numeric Editing” and “File Saving Naming Options”.
Alpha Numeric Editing
— Keyboard Style – Toggles through Qwerty/ABC style keyboards that the
Labeler displays. Refer to
“How to use the FieldFox labeler ” on page 820.
File Saving Naming Options
— Prefix – Displays the current choice for Prefix. Choices are User, Last File
(default), or Off. Refer to Prefixes and Suffixes for Filenames in
“Prefixes and
Suffixes for Filenames” on page 829
.
— Auto Append – Displays the current choice for Auto Append to a filename
(Suffix). Choices are Off (default), Number, Date. Refer to
“Prefixes and
Suffixes for Filenames” on page 829
.
Quick Save Editing
Enables/disables the Quick Save feature. Quick Save saves any files you have
set to On in the Group Save File Types preferences. Refer to
“Group Save File
Types Editing” on page 790
.
Before setting the preferences for the File Folders, you must select the
Device and Folder locations. Refer to
Chapter 33, “File Management.”