Keysight Technologies C Series - Date and Time; GPS - Distance Settings

Keysight N9915-90020 User’s Guide 787
System SettingsFUTURE
Preferences
Date and Time
Choose the Date and Time values (Date and Time, Time Format, Date Format,
and Time Zone). See also
“Date and Time, Format, and Time Zone Settings” on
page 803
.
How to select Date and Time units:
1. Press System 7
> Preferences > Preferences
2. Then use arrow softkeys () or the knob to select Date and Time.
3. Then Edit for each of the following:
— Date and Time
— Edit as needed (Refer to
“Date and Time, Format, and Time
Zone Settings” on page 803
):
——Time Format
——Date Format
——Time Zone
4. Then Done Edit (for each change in setting)
GPS – Distance Settings
Choose the GPS values (GPS State, Elevation Unit, GPS Sync Clock, Display, Lat/Lon
Format). See also
“GNSS (GPS+) and GPS” on page 795.
How to select GPS distance units:
1. Press System 7
> Preferences > Preferences
2. Then use arrow softkeys () or the knob to select GPS.
3. Then
Edit for each of the following:
— GPS State
— Off (default)
— Internal
— External
— Elevation Unit
— Meters (default)
— Feet
— Inches
— GPS Sync Lock