561
Keysight Handheld Analyzers
N99xxC User’s Guide
21 Built-in Power Meter Mode – Option 310
Built-in Power Meter (also known as Channel Power Meter) uses the SA input
connector to make quick and simple power measurements over a selectable
frequency band. A power sensor is NOT required.
In this Chapter
See Also
The following Built-in Power Meter settings are identical to the standard Power
Meter settings:
“Frequency/ Span / Step” on page 563
“Radio Standard” on page 564
“How to set Attenuation” on page 564
“Scale” on page 573
“Relative and Offset Power Measurements” on page 574
“Display Units” on page 575
“Averaging” on page 576
“Single or Continuous Measure” on page 576
To Next Page
Loading...
