Keysight Technologies C Series - How to Playback a Session

546 Keysight N9915-90020 User’s Guide
Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
—Press Play to start replaying the recording from the beginning.
—Press
Record to continue recording.
How to Playback a Session
—Press Trace 6
— If the session is already open, skip the following step. Otherwise:
—Then
Record Playback
—Press
Recall Session Then select a session to playback and press
Open.
—Then
Recorder Player
—Then Play
PLAY is displayed in the left of screen graticules during playback. When the
end of the recording is reached, playback begins again at trace 1 and
continues to loop indefinitely.
During playback, choose from the following:
—
Pause Resume Temporarily halts playback. Then choose from the
following:
—
Pause Resume Press to continue playing.
—
Play Press to restart playback.
—
Stop Press to stop playback.
— Advanced Playback Activated automatically when paused. Opens a
menu of advanced playback softkey choices:
Pause Resume
Temporarily pauses or resumes playback.
Playback State/Tag
Enables you to continue playback from a state
tag, or scroll through the state tags. Enter a
value between 1 and the total number of state
tags using the numeric keypad, arrows, or
the rotary knob. Active when playback is paused.
Learn more in
About State and User Tags in
“About
State and User Tags” on page 544
.
Page Up Page Up and Page Down navigate the recorded data
one ’screenful’ at a time by modifying the Playback
Trace Number. Page Down will advance Playback
Trace Number to a higher value by the number of
lines on the screen, and Page Up, will reduce
Playback Trace Number to a lower value by the
number of lines on the screen.
Page Down