Keysight Technologies C Series - Importing a.zip File to the FieldFox

Keysight N9915-90020 User’s Guide 485
Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
Importing a .zip File to the FieldFox
Importing a .zip File to the FieldFox
On the FieldFox:
Press System 7
> Utilities > Mapping > Map Explorer (Get Maps)
1. Press Import Maps
2. Verify your SD card/USB Source Device is selected.
If not then:
Press
Source Device [Internal] > SD Card | USB
3. Press Import Maps (ZIP)
4. In the "Select .zip file to import" window that opens, if there is
more than one .zip file listed, select the .zip file you want to load by using
the arrows, or the rotary knob and then press
Recall File.
Refer to
Figure 16-11 on page 487 and Figure 16-11 on page 487.
5. Press
Back
to return to the previous menu.
For FTP, refer to Refer to
“Move (Copy) Files” on page 822 and to the
:MMEM SCPI commands in the FieldFox Programming Help
https://rfmw.em.keysight.com/wireless/helpfiles/FFProgrammingHelpWe
bHelp/Home.htm
on www.keysight.com. See also, “How to Set Up
Mapping When the FieldFox Is On The LAN” on page 489
.