Keysight Technologies C Series - Amplitude Markers; Marker Search

Keysight N9915-90020 User’s Guide 605
Pulse Measurements Mode – Option 330
Pulse Measurement Settings
Up to six standard markers can be used to provide readouts of the Y-axis
amplitude at the current X-axis location.
The six standard markers can also be used as Delta Markers.
Learn more about standard markers in
“All about Markers” on page 734.
Amplitude Markers
Amplitude markers are horizontal dotted lines that you can move to any
amplitude level on the screen. The two amplitude markers can be set
independently or used as a pair of delta markers.
Amplitude markers can be used as a visual comparison aid with the pulse
measurement traces.
How to make Amplitude Marker settings
—Press Marker
—Then
More
—Then
Ampl Markers
— Then choose from the following:
— OFF Amplitude markers are NOT displayed.
—
ON Amplitude markers ARE displayed at their previous positions.
—Then
Ampl Mkr 1 or 2
— Enter a value in dBm for the marker using the numeric keypad, the
arrows, or the rotary knob.
—Press
Delta Ampl Mkr
— Then choose from the following:
— ON AmplMkr 2 value is relative to AmplMkr 1. When AmplMkr 1 is
moved, AmplMkr 2 also moves to maintain the AmplMkr 2 value
between them.
—
OFF The two amplitude markers move independent of one another.
Marker Search
Use Marker Search to find and move markers to locations on the Tr 1 trace.
How to Search with Markers
— Activate the marker to be used for the search
—Then press Mkr ->/Tools
.
—Then
Marker Search