Keysight N9915-90020 User’s Guide 231
SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
This section consists of:
—
“EMF Features” on page 231
— “EMF Setup Procedure” on page 233
EMF Features
EMF has the following features:
EMF Measurement Results:
— Measure and display corrected field strength in RMS average power
— Antenna control over X, Y, and Z antenna factors downloaded via USB
— Pass/Fail limit testing supported
—External PC not required
EMF uses the following data formats:
— Field Strength units:
— dBµV/m – For use with E-field signals
— dBµA/m – For use with H-field signals
— dBG – dB Gauss
— dBpT - dB Tesla
To Next Page
Loading...
