Keysight Technologies C Series - System Information; Event Log; Battery; Internal Temperatures

812 Keysight N9915-90020 User’s Guide
System SettingsFUTURE
Service Diagnostics
— The Service diagnostics menu is generally used to display service-related
information. To access these menu items, press System 7
then Service
Diagnostics.
System Information
The System information table shows important information about your
FieldFox. The following is the most useful information:
— Model Number – FieldFox model
— Serial Number – Identification number of your FieldFox
— Firmware Release – The currently installed version of software. Check to
see if you have the latest firmware at:
www.keysight.com/find/fieldfoxsupport
— Network Identity – The network name and current IP address of your
FieldFox.
— Reflectometer Factory Cal - The Factory (CalReady) Calibration shows the
date and time that the factory cal was performed for each test port and the
Thru connection. The format is P1 <date time>, P2 <date time>, P1-P2
<date time>. The factory calibration is updated when you send your
FieldFox to Keysight for Instrument Calibration. Learn more in
Appendix C:
“Instrument Calibration”
.
Event Log
The Event Log shows the information that has appeared on the FieldFox
screen. The most recent information is at the top of the table.
Press Clear Events to erase this information.
Battery
Learn more in Chapter 34,“Working with the Lithium-Ion Battery”, on page
835
.
Internal Temperatures
Learn about the importance of the internal FieldFox temperatures in “FieldFox High
Temperature Protection” on page 32
.