Keysight Technologies C Series - Prefixes and Suffixes for Filenames

830 Keysight N9915-90020 User’s Guide
File ManagementFUTURE
Saving and Recalling Files
How to edit keywords
1. Press Save/Recall 9
> More > Edit Keywords
2. Then Next Page and Previous Page to view all keywords.
— Use the arrows to select a keyword to edit.
— When a keyword is selected, then press Edit
.
— Then choose from the following:
—Press
Select to add the cursor character to the end of the selected
keyword.
—Press Backspace to erase the last character from the end of the
selected keyword.
—Press Shift to change from upper-case to lower-case and vice versa.
—Press
Alt Keywords
to toggle through different keyword choices.
How to move the cursor:
— Use the rotary knob to move the cursor along the same row. The cursor will
change rows when it comes to a row end.
— Use the arrows to move the cursor up and down between rows.
When the selected keyword is complete:
—Press
Done to save all keywords and close the Edit Keywords labeler. These
keywords will exist on the FieldFox until changed.
—Press Cancel to close the labeler without saving changes.
Prefixes and Suffixes for Filenames
The prefix and suffix (Auto Append) can be used together to organize files.
Once set and enabled, they are automatically entered as the beginning (Prefix)
and end (Suffix - using Auto Append) of a filename when performing a Save
operation. These settings are persistent, until disabled. Refer to
“How to edit
the Prefix and Suffix (Auto Append)” on page 830
and “How to enable/disable
Auto Append (Number and Date)” on page 832
.
This section contains the following sections:
—
“How to edit the Prefix and Suffix (Auto Append)” on page 830.
If you are only interested in adding a prefix or a suffix to a new file or files
one time, refer to
“Manage Files” on page 826.
File–Save Naming Options are settings are persistent through Preset and
power cycling (e.g., Prefix, Auto Append).