621
Keysight Handheld Analyzers
N99xxC User’s Guide
26 ERTA (Extended Range Transmission Analysis) Mode -
Option 209
ERTA (also known as FoxTrot) uses two FieldFox units to make long-distance
scalar transmission measurements. One unit is the source and the other unit is
the Receiver.
In this Chapter
“Overview” on page 622
“Requirements and Limitations” on page 623
“Start Connection Wizard” on page 624
“Configure Measurement Settings” on page 628
“Select Measurement” on page 628
“Normalize” on page 629
“Source Tracking Offset and Offset Reversal” on page 629
“Improve Dynamic Range” on page 630
“Source Enable and Source Mode” on page 630
To Next Page
Loading...
