Keysight Technologies C Series - Page 242

242 Keysight N9915-90020 User’s Guide
SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
— Back – To exit to previous softkey menu.
— Press
Done when finished editing to exit.
c. Press
Save Cable to save your changes. See also Chapter , “File
Saving Naming Options”
and then to “Alpha Numeric Editing” on
page 789
.
For more information:
— See also
“GNSS (GPS+) and GPS” on page 795.
Figure 9-26 Example: Editing and Adding a New X axis antenna is shown. But, the Cable
Loss table is similar.