344 Keysight N9915-90020 User’s Guide
Electromagnetic Interference (EMI) Measurements – Option 361
About Electromagnetic Interference (EMI) Measurements
EMI has the following features:
EMI Measurement Results:
— Amplitude Probability Distribution Statistics (APD)
—Histogram
—CCDF traces displayed
— Center frequency (active with APD Statistics)
— Selectable CISPR Bands (A, B, C, D, or E)
— Positive Peak trace (active with APD Statistics OFF)
— Quasi-Peak trace (active with APD Statistics OFF)
— EMI Average trace (active with APD Statistics OFF)
— 200 Hz, 9 kHz, 120 kHz 6 dB resolution bandwidths, and 1 MHz impulse
bandwidth
— Frequency bands can be coupled to CISPR bands
— Logarithmic frequency axis
Refer to
“EMI Measurement Mode Setup Procedure” on page 345.
To Next Page
Loading...
