Keysight Technologies C Series - Page 348

348 Keysight N9915-90020 User’s Guide
Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
In this Chapter
“Using OTA (Options 370 – LTE FDD, 372 – TDD, 377 – 5G TF, and Option
378 – 5G NR / 5G NR Conducted)” on page 350
“About Over–the–Air (OTA) Measurements” on page 352
— “LTE FDD and LTE TDD Features (Option 370 and Option 371)” on
page 352
— “5G TF Features (Option 377)” on page 360
— “5G NR Features (Option 378)” on page 361
— “5G NR EVM Conducted Features (P/O: Option 378)” on page 364
“How to Set Up Over–the–Air (OTA) Mode Settings” on page 365
— “OTA Setup Procedure” on page 365
— “Optional: Using RTSA to verify the signal quality (Requires Option 350
and Preamp Option 235)” on page 383
— “How to Define a Cell or Cell(s) and Use OTA” on page 384
“How to Set Up EMF Mode Settings (Requires EMF (Option 358) and 5G NR
(Option 378))” on page 400
“How to Use Data Logging (OTA Options 370, 372, 377, and 378)” on
page 407
— “Screen Annotation” on page 407
— “How to Record a Data Log Procedure” on page 408
— “To change Data Logging Configuration settings:” on page 409
— “How to Play a Data Log” on page 410
“Other Features Available” on page 411
— Alignments (SA chapter) – “Alignments” on page 206
— External Gain (SA chapter) – “External Gain” on page 160
“About the Auto-Range Feature” on page 412
“Troubleshooting” on page 416
“Glossary (OTA)” on page 417