Keysight N9915-90020 User’s Guide 351
Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
Using OTA (Options 370 – LTE FDD, 372 – TDD, 377 – 5G TF, and Option 378 – 5G NR
/ 5G NR Conducted)
— FR1 (410 MHz to 7.125 GHz) and
— FR2 (24.25 GHz to 5.26 GHz
c
)
— EMF measurements (Requires Option 358)
— EVM synchronization signal measurements
— Single acquisition multiple simultaneous
measurements
— Measure CC, Cell IDs, and KPI’s for
multiple cells
— SSB Beam index
a. When multiple component carriers are selected, the results of the component carrier
(CC) with the highest power is displayed.
b. LTE FDD, LTE TDD, and 5G NR can measure and display multiple cells. 5G TF and 5G NR
EVM Conducted only have the ability to measure and display a single cell.
c. With frequency extension via OML downconverter. Refer to
Chapter 31, “System
Settings.” and then “Utilities” on page 772.
To Next Page
Loading...
