392 Keysight N9915-90020 User’s Guide
Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
Figure 13-26 Spectrum and Table Type (SSB Offset Detection Softkeys) – 5G NR
Step 3. Modify Scale and the Display Color Bar Settings
To assign colors to low and high power values:
1. Press
Scale/Amptd > Red Limit to set high power values and to set the
color.
2. Press Blue Limit
to set low power values and to set the color.
3. And, then press
System > Display > Display Colors, to set Indoor, Outdoor,
or other display colors. See also
Chapter 31, “System Settings.”
If Freq then: Meas Setup > More > SSB Offset Detection
If Chan then: Meas Setup > More
Freq/Dist > Freq Mode > Chan or Freq
To Next Page
Loading...
