Keysight Technologies C Series - Page 395

Keysight N9915-90020 User’s Guide 395
Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
——Data Log-Play files are save-recalled to:
"[CurrentDevice]:\RecordPlayback\
OTA\"
Or
—
System – Sets the User Folder to the user defined
system folder path/name:
——List files are save to-from
"CurrentDevice\<UserSelectedFolde
r>\"
——Data Log-Play files are save-recalled to:
"CurrentDevice\<UserSelectedFolde
r>\"
Refer to “File Management” on page 817.
— Then File Type
— KML (default) or
— CSV
— Then
Save Log File.
or
— Then Recall Log File.
—
Auto Save OFF ON - (default = OFF) Press to toggle to ON to
enable Auto Save.
— Then Back
c. Optional: Press Indoor Map Data Logging then
— Record Indoor Data or Recall Indoor Log File. Refer to “How
to Use Data Logging (OTA Options 370, 372, 377, and 378)”
on page 407
.
Learn more, refer to
Chapter 16 Mapping and “Option 352
Indoor Maps Setup Procedure” on page 491 and “Setting up
Data Logging” on page 503
.
2. Press
Back to return to previous menu.
3. Outdoor Mapping: Press
Record to begin a new recording and then
— Then Maps To enable map view and related features (e.g., Data
Selection, Red/Blue Limits, Labels & Icons, Zoom).
—
View Map OFF ON
Displays the current GPS location.