442 Keysight N9915-90020 User’s Guide
5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
Then choose:
— Save to set the attenuator power (default: –10 dB). Set to 0 dB.
—
Recall change to ON.
—
Device to set the absolute power (dBm)
—
File Type then choose:
— State Saves the current state settings
—
Trace+State Saves the current Trace+State information
—
Picture (PNG) to save the current displayed trace as a PNG
—
Data (CSV) save files as a CSV file
Learn more, refer to
Chapter 33, “File Management.”
16. Optional: Modify scale and amplitude values:
Press Scale/Amptd
Then one of the following:
— Autoscale Automatically adjusts the Y-axis minimum and maximum
values.
— Scale Manually enter a scale per division values.
— Others:
Scale, Ref Level, etcetera as desired.
Learn more, refer to
Chapter 30, “Data Analysis Features.”
17. Optional: Modify the averaging and Integrated BW settings:
Press
BW
Then one of the following:
— Average Enable OFF ON
—
Average Count
—
Integ BW
Learn more, refer to
Chapter 30, “Data Analysis Features” and Chapter 9,
“SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE.”
To Next Page
Loading...
