Keysight N9915-90020 User’s Guide 475
Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
See Also
“Importing a .zip File to the FieldFox” on page 485
“How to Set Up Mapping Settings” on page 488
— “How to Set Up Mapping When the FieldFox Is On The LAN” on
page 489
— “Option 352 Indoor Maps Setup Procedure” on page 491
— “Option 352 Outdoor Maps Setup Procedure” on page 495
— “Setting up Data Logging” on page 503
“How to Use Data Logging (Option 352)” on page 511
— “Screen Annotation” on page 511
— “How to Add Directional Finding (DF) Bearing” on page 513
— “How to Record a Data Log (Outdoor Logging Only)” on page 516
— “To change Data Logging Configuration settings:” on page 517
— “How to Play a Data Log” on page 517
— “Update Available Message” on page 522
“Troubleshooting” on page 518
— “General Troubleshooting” on page 520
— “Port 5000 in Use Error” on page 520
— “Miscellaneous Mapping Errors” on page 523
Other Features Available:
— Alignments (SA chapter) –
“Alignments” on page 206
— External Gain (SA chapter) – “External Gain” on
page 160
— Scale Settings (Data Analysis chapter) – “All about
Scale Settings” on page 762
“Why and When to Calibrate” on page 126
Chapter 31, “System Settings.”
(Changing display colors)
Chapter 33, “File Management.”
To Next Page
Loading...
