510 Keysight N9915-90020 User’s Guide
Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Set Up Mapping Settings
— File Folder Default System (Default = Default) or
—
File Type (Default = CSV) KML or DREC (DREC applies to Option 360
only)
— Auto Save OFF ON To enable/disable auto save to protect your data,
if power is lost (Default = OFF)
— Then Back
Outdoor Mapping Only: Export KML File Into 3rd Party Mapping
Software
— Export KML file into 3rd party mapping software (i.e., Google Map or
Google Earth). Refer to
“Import and Play back KML Files into 3rd Party
Software (Example: Google Earth with Animation Tool)” on page 501
.
Record-Play files are saved to:
— If File Folder is set to Default then Record-Play files are save-recalled
to: "[CurrentDevice]\RecordPlayback\[Current mode]\"
— If File Folders are set to System, then Record-Play files are
save-recalled to: "CurrentDevice\<UserSelectedFolder>\
Learn more about file settings, refer to
Chapter 33, “File Management.”
To Next Page
Loading...
