Data Analysis FeaturesDELETE_IF
All about Limit Lines
752 Keysight N9915-90020 User’s Guide
Figure 30-7 A lower limit line (red) built from the trace (yellow) shifted down 5 dB.
How to Build Limit Lines from a Trace
1. Select the trace from which limits will be built.
2. Press Limit 8
> Edit > Build From Trace. A limit line table appears.
Figure 30-8 Build From Trace (1 of 2)
Build from Trace is NOT allowed for traces with more than 1001 data
points.
To Next Page
Loading...
