Keysight N9915-90020 User’s Guide 77
TDR (Time Domain Reflectometry) - Option 215
9. Either press Edit/Save/Recall Cables then Recall Cable, or directly enter
the Velocity Factor/Cable Loss of the DUT using the
Velocity Factor and
Cable Loss
keys.
10. Connect the start end of the DUT to the FieldFox.
11. Press Meas Setup 4
then Settings then Next Page. If the Alias-free Range
setting is Off, then you may see Alias faults on the screen. Learn more in
“About Alias Faults” on page 86
To Next Page
Loading...
