Keysight Technologies C Series - Page 838

832 Keysight N9915-90020 User’s Guide
File ManagementFUTURE
Saving and Recalling Files
——Cancel to cancel edits and return to the previous menu.
——
Done to save changes and return to previous softkey menu.
—
Edit Number Suffix – Sets the Auto Append number suffix formatting (e.g.,
“0001”).
Couplings: Auto Append must be set to “Number”. This softkey is inactive
(grayed out) when Auto Append == Date.
— Edit Suffix to edit the suffix using the labeler. For more information on the
Edit Suffix softkey menu refer to the Edit Prefix softkey menu descriptions
above. (Default == UserSuffix).
Couplings: For this softkey to be active, the Prefix/Suffix softkey must be set
to “User”. Learn more, see
“Preferences” on page 780 and to “File Saving
Naming Options” on page 789
.
—
Back
to return to the previous menu.
How to move the cursor
— Use the rotary knob to move cursor on the same row.
— Use the arrows to move the cursor up and down the rows.
When the Prefix is complete
—Press
Done to save the Prefix and close the labeler. This Prefix will exist on
the FieldFox until it is changed.
—Press Cancel to close the labeler without saving changes.
When the Suffix is complete
—Press
Done Edit to save the Suffix and close the labeler. This Suffix will exist
on the FieldFox until it is changed (i.e., with subsequent increments).
—Press Cancel
to close the labeler without saving changes.
How to enable/disable the Prefix/Suffix (persistent)
1. Press Save/Recall 9 > More > Prefix Suffix
2. Then Prefix/Suffix
— OFF (default) to disable the prefix and suffix on subsequently saved
files. Edit Prefix and Edit Suffix softkeys are grayed out (inactive).
When Last File is selected, the Edit Prefix, Auto Append, Edit Number
Suffix, and Edit Suffix softkeys are grayed out (inactive). Refer to “Prefixes
and Suffixes for Filenames” on page 829
.