Keysight E4980A - Page 382

382 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
Command list
10-
System Beeps :SYSTem:BEEPer[:IMMediate]
Beep sound enable :SYSTem:BEEPer:STATe
Beep sound tone selection :SYSTem:BEEPer:TONE
GPIB address setup :SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
Static IP address setup :SYSTem:COMMunicate:LAN[:SELF]:ADDRess
IP address obtaining method :SYSTem:COMMunicate:LAN[:SELF]:CONFigure
SOCKET control port number
readout
:SYSTem:COMMunicate:LAN[:SELF]:CONTrol
Current IP address readout :SYSTem:COMMunicate:LAN[:SELF]:CURRent:ADDRess
Current Gateway address readout :SYSTem:COMMunicate:LAN[:SELF]:CURRent:DGATewa
y
Current Subnet Mask readout :SYSTem:COMMunicate:LAN[:SELF]:CURRent:SMASk
Static Gateway address setup :SYSTem:COMMunicate:LAN[:SELF]:DGATeway
MAC address readout :SYSTem:COMMunicate:LAN[:SELF]:MAC
Network preset :SYSTem:COMMunicate:LAN[:SELF]:PRESet
Static Subnet Mask setup :SYSTem:COMMunicate:LAN[:SELF]:SMASk
Clock time setup :SYSTem:DATE
Error message readout :SYSTem:ERRor[:NEXT]
Front panel key lock enable :SYSTem:KLOCk
Instrument setting and correction
data reset
:SYSTem:PRESet
Clock date setup :SYSTem:TIME
Trigger Step delay time setup :TRIGger:DELay
Trigger :TRIGger[:IMMediate]
Selects the trigger mode :TRIGger:SOURce
Trigger delay time setup :TRIGger:TDEL
Voltage Voltage level setup :VOLTage[:LEVel]
Function Setting/execution item Command