Keysight E4980A - Page 400

400 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
Command list
10-
LEVEL [A] Clears the previous list sweep table, sets AC current
sweep as the list sweep parameter, and sets AC current
points for the AC current list sweep
:LIST:CURR
LEVEL [V] Clears the previous list sweep table, sets AC current
sweep as the list sweep parameter, and sets AC current
points for the AC current list sweep
:LIST:VOLT
MORE
BIAS
[A]
Clears the previous list sweep table, sets DC current
sweep as the list sweep parameter, and sets DC current
points for the DC current list sweep
:LIST:BIAS:CURR
BIAS
[V]
Clears the previous list sweep table, sets DC current
sweep as the list sweep parameter, and sets DC current
points for the DC current list sweep
:LIST:BIAS:VOLT
DC SRC
[V]
Clears the previous list sweep table, sets the DC source
sweep as the list sweep parameter, and sets DC source
points for the DC source list sweep
:LIST:DCS:VOLT
RETUR
N
Returns to the softkey display screen one level higher
FREQ[Hz]
1
CLEAR
LINE
Clears the sweep point that has been selected
FILL
LINEAR
Fill the sweep points between selected two points with
linear
FILL LOG Fill the sweep points between selected two points with
log
NEXT
PAGE
Displays the next page
PREV
PAGE
Displays the previous page
HIGH
CLEAR
LINE
Clears the sweep point that has been selected
NEXT
PAGE
Displays the next page
PREV
PAGE
Displays the previous page
Key Operation Function SCPI Command