Keysight E4980A - Page 401

Keysight E4980A/AL Precision LCR Meter 401
SCPI Command Reference
Command list
LMT
- Sets the limit values of the limit function for the list sweep
measurement
:LIST:BAND OFF
A Sets the limit values of the limit function for the list sweep
measurement
:LIST:BAND A
B Sets the limit values of the limit function for the list sweep
measurement
:LIST:BAND B
LOW
CLEAR
LINE
NEXT
PAGE
Displays the next page
PREV
PAGE
Displays the previous page
MODE
SEQ Selects the sweep mode for the list sweep measurement
function
:LIST:MODE SEQ
STEP Selects the sweep mode for the list sweep measurement
function
:LIST:MODE STEP
No.
CLEAR
TABLE
Clears the list sweep setup :LIST:CLE:ALL
NEXT
PAGE
Displays the next page
PREV
PAGE
Displays the previous page
MEAS SETUP
ALC
OFF Turns OFF the Automatic Level Control (ALC) :AMPL:ALC OFF
ON Turns ON the Automatic Level Control (ALC) :AMPL:ALC ON
AVG Sets the integration time and the averaging rate :APER
BIAS Sets the DC bias. :BIAS:VOLT:LEV
:BIAS:CURR:LEV
Key Operation Function SCPI Command