Keysight E4980A - Page 404

404 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
Command list
10-
R-X Selects the measurement function :FUNC:IMP:TYPE RX
Vdc-Id
c
Selects the measurement function :FUNC:IMP:TYPE VDID
Y- ...
Y-d Selects the measurement function :FUNC:IMP:TYPE YTD
Y-r Selects the measurement function :FUNC:IMP:TYPE YTR
RETU
RN
Returns to the softkey display screen one level higher
Z- ...
Z-d Selects the measurement function :FUNC:IMP:TYPE ZTD
Z-r Selects the measurement function :FUNC:IMP:TYPE ZTR
RETU
RN
Returns to the softkey display screen one level higher
RETUR
N
Returns to the softkey display screen one level higher
IDC MON
OFF Disables the DC current level monitor function :FUNC:SMON:IDC:STAT
OFF
ON Enables the DC current level monitor function :FUNC:SMON:IDC:STAT ON
LEVEL Sets the voltage level for the measurement signal :VOLT:LEV
:CURR:LEV
MEAS TIME
LONG Sets the integration time and the averaging rate :APER LONG
MED Sets the integration time and the averaging rate :APER MED
SHORT Sets the integration time and the averaging rate :APER SHOR
RANGE Selects impedance measurement range :FUNC:IMP:RANG:VAL
AUTO Enables the auto range function for the impedance
measurement
:FUNC:IMP:RANG:AUTO
ON
HOLD Enables the auto range function for the impedance
measurement
:FUNC:IMP:RANG:AUTO
OFF
REF A Sets the reference value for deviation measurement :FUNC:DEV1:REF:VAL
Key Operation Function SCPI Command