Keysight E4980A - Page 408

408 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
Command list
10-
TONE 4 Selects beep tone 4 :SYST:BEEP:TONE 4
TONE 5 Selects beep tone 5 :SYST:BEEP:TONE 5
DATE/TIME
DATE
DAY Sets the date of the internal clock :SYST:DATE
MONTH Sets the date of the internal clock :SYST:DATE
RETUR
N
Returns to the softkey display screen one level higher
YEAR Sets the date of the internal clock :SYST:DATE
TIME
HOUR Sets the time of the internal clock :SYST:TIME
MINUT
E
Sets the time of the internal clock :SYST:TIME
RETUR
N
Returns to the softkey display screen one level higher
SECON
D
Sets the time of the internal clock :SYST:TIME
GPIB ADDR Sets the GPIB address :SYST:COMM:GPIB:SELF:A
DDR
IP CONFIG
AUTO Sets the IP address to AUTO :SYST:COMM:LAN:SELF:C
ONF AUTO
MANUAL Sets the IP address to MANUAL :SYST:COMM:LAN:SELF:C
ONF MAN
FACTORY
DEFAULT
Sets the IP address at the default
MANUAL
GATEWAY
ENTER Sets the static Gateway address :SYST:COMM:LAN:SELF:D
GAT
FACTORY
DEFAULT
Sets the IP address at the default
Key Operation Function SCPI Command